Tripp Lite UPS Smart 500VA 300W Rackmount AVR 120V USB DB9 SNMP 1URM

• SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages voltage regulation during brownouts plus network-grade AC surge suppression
• 500VA / 300 watt power handling capability compatibile with networking telecom and other sensitive electronic devices
• Supports 1U rackmount installation in 2 or 4 post rack enclosures upright tower placement also supported - mounting accessories included
• Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts)
• Maintains regulated 120V nominal output during brownouts as low as 90V
• Includes 6 UPS-supported outlets with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support
• PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging pager & email notification event logging and running user-defined script commands
• Offers simultaneous monitoring by up to 3 directly-connected devices through included USB DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD) or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
• Communications ports support messaging of UPS and line power status including on-battery low-battery power restored AC line voltage DC battery voltage and remaining battery capacity
• Supports timed inverter shutoff after unattended shutdown activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
• Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
• Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
• Emergency Power Off (EPO) interface with cable
• Multi-function audible alarms and set of 5 front panel LEDs
• Network-grade AC surge suppression
• Attractive all-black color scheme
• UPS battery set ships fully assembled and ready for installation no time consuming connection of internal batteries by user is necessary
• Two year warranty with $250000 connected equipment insurance (USA & Canada only)

500VA/300W/120V Battery Backup for PC Networks Security Systems or Digital Signage
The SmartPro® line-interactive SMART500RT1U UPS system with AVR protection provides reliable battery backup and AC power protection against blackouts brownouts surges and line noise that can damage valuable electronics or destroy data. The 120V battery backup is ideal protection for point-of-sale and kiosk applications a small business VoIP network or rack-mount equipment in your server room or network closet.

Allows Time to Back Up Critical Files During a Blackout
Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes.

6 NEMA Outlets Protect Your Connected Components
Six 5-15R outlets provide battery backup 567 joules of network-grade surge protection and voltage regulation for your crucial components. Five outlets are UPS-supported and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment.

Automatic Voltage Regulation (AVR) Corrects Low-Voltage Conditions
AVR protects your equipment from incremental hardware damage data loss and performance problems caused by brownouts. The SMART500RT1U maintains regulated 120V nominal output during brownouts as low as 90V while keeping the battery fully charged and ready to take over in case of power failure. The fast-to-recharge internal batteries are field-replaceable and hot-swappable.

Optional WEBCARDLX Network Interface Offers 24/7 Access
An accessory slot accommodates the optional Java-free HTML5-based WEBCARDLX interface (sold separately) which enables full remote access for site power and UPS status monitoring configuration control and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Automated alerts help prevent accidental overloads power loss and downtime.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

Designed for High Efficiency to Help You Save Money and Protect the Environment
A 97% efficiency rating reduces BTU emissions energy consumption and ultimately your energy costs.

• SMART500RT1U UPS System
• Mounting hardware
• Cabling for USB & DB9 monitoring and EPO switching
• PowerAlert unattended shutdown and UPS/Power monitoring software
• Warranty information and instruction manual